The Professional Solution for mounting Wireless Receivers and Hard Disk Recorders to your camcorder
Phone orders using your credit card from 10am - 6pm Pacific Time or pay by Pay Pal anytime, no Pay Pal account neccessary!"
For orders outside NorthAmerica click on the "Add Overseas Shipping" button on the bottom of this page. This will add $22 for air freight.
Cold Shoe screws to newer bracket systems to add an additional cold shoe to vertical surface of Bracket 1 HD and Bracket 1 mini or horizontal surface of Over camera Plate and Position Plate. Cold Shoe can be mounted on vertical surface facing up or forward and on horizontal surface facing forward or back.
For Use With: Bracket 1 HD, Bracket 1 EX, Bracket 1 C2, Bracket 1 mini, Over Camera Plate and Position Plate
Acessories: Bracket 1 HD, Bracket 1mini, Over Camera Plate, Position Plate
Price: $9.95
Designed to add a Cold Shoe to Bracket 1a & Bracket 1c bracket systems. Attaches to 1/4" accessory holes on the lower-side section of the bracket.
For use with: Bracket 1a, Bracket 1c
Acessories: Bracket 1a, Bracket 1c
Price: $19.95
Angled bracket with Cold Shoe attached, screws to Bracket systems to add an additional cold shoe over the top of the camera. Can be mounted in numerous positions. See "mounting instructions" for placement.
For use with: Bracket 1 HD, Bracket 1mini, Bracket 1a, Bracket 1c
Price: $29.95
Used for mounting Sennheiser Evolution series EW-100 / 500 directly to Bracket 1 (fits G1 and G2). Receiver's spring clip slides over EW Clip locking receiver in place. Second receiver can be mounted with 1/4-20 screw (included - see "mounting instructions") or by adding an additional cold shoe.
For use with: Bracket 1 HD, Bracket 1mini, Bracket 1a, Bracket 1c, Position Plate
Acessories: Bracket 1 HD, Bracket 1mini, Bracket 1a, Bracket 1c, Position Plate
Price: $18.95
Used for mounting Sony UWP receivers directly to Bracket 1. Receiver's spring clip slides over S Clip locking receiver in place. Second receiver can be mounted with 1/4-20 screw (included - see "mounting instructions") or by adding an additional cold shoe.
For use with: Bracket 1 HD, Bracket 1mini, Bracket 1a, Bracket 1c, Position Plate
Acessories: Bracket 1 HD, Bracket 1mini, Bracket 1a, Bracket 1c, Position Plate
Price: $20.95
Universal accessory mounting adapter. A low cost solution for attaching your wireless receiver, hard disk recorder, or other audio accessories to the Bracket 1 bracket system or any camera with the industry standard mounting pattern. Quick Plate firmly holds the receiver against rubber pads using a Velcro type strap. Two Quick Plates can be mounted back to back on Bracket 1 HD, Bracket 1mini, and Position Plate to hold 2 wireless receivers or one receiver and one hard disk recorder.
For mounting: Most all wireless receivers and hard disk recorders including Panasonic Citidisk, Sony HVR-DR60, Firestore, and Nnovia. To mount the Firestore and Nnovia, please add the appropriate "longer velcro strap" as shown below.
For use with: Bracket 1 HD, Bracket 1mini, Bracket 1a, Bracket 1c, Position Plate, Over Camera Plate
Acessories: Bracket 1 HD, Bracket 1mini, Bracket 1a, Bracket 1c, Position Plate, Over Camera Plate
Price: $34.95
Mount larger accessories to your Quick Plate by adding a longer Velcro Strap. Must be used with the Quick Plate. Comes in three longer sizes:
Large:
Designed to hold the Firestore FS-4 and FS-100 Hard Disk Recorder or Wireless Receivers larger than 3-1/4" wide and 1-1/4" thick to the Quick Plate. (for devices from 8-1/2" to 11" in circumference)
X-Large
Designed to hold the Nnovia Hard Disk Recorder to the Quick Plate. (for devices from 10" to 13-1/2" in circumference)
XX-Large:
Designed to hold large audio mixers and accessories to the Quick Plate. (for devices from 11" to 16" in circumference)
For use with: Quick Plates on all Bracket Systems
Fits: Quick Plate
Price: $9.95
Your wireless receiver is protected from the elements in this felt lined aluminum box. A stainless steel spring clip secures the receiver in place. Quick Boxes can be "stacked" next to each other to hold additional wireless receivers. Will fit all our Bracket 1 brackets, Over Camera Plate, Position Plate, and any professional camera set-up that uses industry standard mounting pattern.
Two sizes fit most receivers
Quick Box Small - Fits most small wireless receivers up to 65mm wide & 27mm thick, including:
- Audio Technica Pro 88 W/R
- Azden 100 LT
- Lectro UCR 100
- Samson M 32
- Sennheiser EW 100 / 500
- Audio Technica ATWR 100, 1800 series
- Azden 1000 URX
- Lectro 201 / 401 / 211 / 411
- Telex ENG 100
Acessories: Bracket 1 HD, Bracket 1mini, Bracket 1a, Bracket 1c, Position Plate, Over Camera Plate
SMALL BOX
Price: $84.95
BIG BOX
Price: $84.95
Felt lined box custom fit to your wireless receiver. Custom Boxes are available in many sizes. Choose your receiver from one of the drop down lists when ordering (please allow 2 to 3 weeks for delivery for this product).
Acessories: Bracket 1 HD, Bracket 1mini, Bracket 1a, Bracket 1c, Position Plate, Over Camera Plate
Price: $89.95
Mount your Firestore FS-4 or FS-C hard disk recorder in this high-impact plastic cradle. Works with either battery size. You can bolt this to the side of any of our brackets using the enclosed rubber washer and 1/4-20 screw (may require drilling a wider hole in the bracket). Even better to add the Universal Swivel Mount (below) to adjust the position and mount in any cold shoe. Add the Over Camera Cold Shoe to this combination to give you the camera set-up shown on our home page.
For use with: Bracket 1 HD, EX, C2, mini, a, or c
Acessories: Universal Swivel Mount, Over Camera Cold Shoe, Bracket 1 HD, Bracket 1 EX, Bracket 1 C2, Bracket 1 mini, Bracket 1a, Bracket 1c
Price: $49.95
This fully adjustible universal joint mounts in any cold shoe and provides a 1/4-20 screw with a locking plate for mounting accessories. Perfect for mounting a monitor or the Firestore Hard Disk Cradle.
For use with: Firestore Hard Disk Cradle
Acessories: Firestore Hard Disk Cradle, Over Camera Cold Shoe, Cold Shoe 1, Cold Shoe 2
Price: $52.95
Adds an additional mounting position over the camera when used with Bracket 1HD, Bracket 1mini, or Position Plate. Best used for mounting hard disk recorders using the Quick Plate or Cold Shoe 1 adapter.
Screws to Bracket system to add an additional mounting position over the camera, best used for mounting Hard Disk Recorders using the Quick Plate adapter.
For use with: Bracket 1 HD, Bracket 1mini
Acessories: Bracket 1 HD, Bracket 1mini
Price: $49.95
Adds a second, better balanced mounting position to Bracket 1a or Bracket 1c, close to the middle of the camera, while allowing continued use of the mounting position on the original Bracket 1a or Bracket 1c. An additional cold shoe, (cold shoe-1) can also be mounted on top in a horizontal position.
For use with: Bracket 1a, Bracket 1c
Acessories: Over Camera Plate, Over Camera Cold Shoe, EW-Clip, S-Clip, Quick Plate, Quick Box, Custom Box, Bracket 1a, Bracket 1c, Cold Shoe 1
Price: $39.95