Mounting the EW Clip

You may mount one or two Sennheiser EW 100s on the bracket using the EW Clip. The pictures on the right show the setup for mounting two, but the EW Clip is attached in the same manner when mounting just one wireless receiver.

Place the EW Clip on the back side of the Bracket with the tab angled downward as shown in the first picture. Insert the black screws through the holes in the EW Clip and into the threaded holes in the bracket, or through the holes in the bracket, and into the threaded holes in the EW Clip, as shown in the second picture. Slide the receiver over the top of the bracket until the spring clip locks over the tab on the EW Clip.

The most convenient way to mount a second receiver is to add the Cold Shoe-1 (for Bracket 1 HD, EX, C2 or mini) or the Cold Shoe-2 (for Bracket 1a or 1c) and slide the 2nd receiver into the shoe using the cold shoe mount that come with the receiver. The other option is to use the extra silver screw included with the EW Clip (shown in the fourth picture), through the lowest hole in the bracket and into the threads in the bottom cold shoe mount that comes with the receiver.