Bracket base for "Base A" Camera Accessory Mounting System. Add Accessory Adapters to build a custom rig to mount your wireless receivers, battery, flash recorder and other accessories! Fits cameras with dual 1/4-20 threaded pattern (spaced 1.5" apart front to back) on camera handle. Has six 1/4-20 threaded holes on the side plate. Aluminum with stainless steel threaded hardware. Use the "Bracket Finder" in the top left corner of this page to find the correct model for your camera. Mfr# VISLBATHM1
|BaseA Handle Mount System Mounting Options|
Attach the BaseA Handle Mount unit on the top of your camera with rubber washer between the camera and mount (photo 1).
In addition to the side mounting surface which has 6 threaded holes, the stainess steel mounting screws also have a threaded hole on the top for mounting a second BaseA unit or other accessories (Yellow Arrow, photo 2). The Handle Mount 1 also has two small threaded holes for attaching a Cold Shoe-1 (Red Arrow, photo 2).
Use the six 1/4-20 threaded holes on the side surface to attach accessories directly or add adapters and plates to position your accessories as desired.
Photo two shows a Black Magic Shuttle Cradle attached directly to the side plate of a Handle Mount 1 (photo 2)
Photo 3 shows an Accessory Mounting Plate with a Quick Release Adapter and a Quick Plate attached to the Handle Mount 3 on a Sony PMW200. There's also a 90 Adapter screwed to the back of the Handle Mount 3 but it's not being used. You could attach another Accessory Plate or Battery Plate here or utilize the 1/4-20 threaded holes in another way (photo 3).
Photo 4 shows a Handle Mount 1 on a Panasonic camera with a Black Magic Shuttle Cradle on a Long 90 Adapter and a Quick Release Adapter holding an Accessory Plate with a Quick Plate on the back for a wireless receiver (you can also mount a 2nd Quick Plate on the outside of the Accessory Plate (photo 4).
Create an account and login to leave a review for this product!
858-270-3333 M-F 10-6 PT