Used for mounting the new (2025) Sennheiser Evolution EW-DP series wireless microphone receiver directly to our Dual Receiver bracket or our standard Bracket 1 under camera mounting brackets. The spring clip on the receiver slides over EW-DP Clip, locking the receiver in place. A second receiver can be mounted to the under camera bracket system by adding "Shoe Mount for 1/4-20 threaded Hole" to the side of the bracket (see photos 1, 4 and 5 as well as the Cold Shoe-1 mounting instructions). Fits the Dual Receiver Mounting Plate, the Bracket1 A2, HD2, EX2, C, C2, mini2 and DSLR brackets. Mfr# VISLEWDPCLIP
Mounting the EW Clip You may mount one or two Sennheiser EW 100s on the bracket using the EW Clip. The pictures on the right show the setup for mounting two, but the EW Clip is attached in the same manner when mounting just one wireless receiver. Place the EW Clip on the back side of the Bracket with the tab angled downward as shown in the first picture. Insert the provided screws through the holes in the EW Clip and into the threaded holes in the bracket. Slide the receiver over the top of the bracket until the spring clip locks over the tab on the EW Clip. The most convenient way to mount a second receiver is to add the Cold Shoe-1 to the Bracket 1 bracket and slide the 2nd receiver into the shoe while it is attached to the plastic mount that comes with the receiver. |
![]() ![]() ![]() ![]() |