Used for mounting the Sony URX-P03, UWP series and UTX-P2 wireless microphone receivers directly to our standard Bracket 1 under camera mount bracket system or our Dual Receiver Mounting plate. Receiver's spring clip slides over S Clip locking receiver in place. Second receiver can be mounted to the under camera system by adding a Cold Shoe-1 to the side of the bracket (see photos 1-4, as well as Cold Shoe-1 mounting instructions). Fits the Dual Receiver bracket and Bracket1 A, HD2, EX2, c, C2, mini2 and SLR brackets. Mfr# VISLSCLIP
Mounting the S Clip You may mount one or two Sony wireless receivers on the bracket using the S Clip (Pictures here show two Sennheizer receivers but one or two Sony receivers are mounted in the same fashion). Place the S Clip on the back side of the Bracket with the tab angled downward as shown in the 2nd and 3rd picture. Insert the screws through the holes in the S Clip and into the threaded holes in the bracket. Slide the receiver over the top of the bracket until the spring clip locks over the tab on the S Clip. The most convenient way to mount a second receiver is to add the Cold Shoe-1 to the Bracket 1 bracket and slide the 2nd receiver into the shoe while it is attached to the plastic mount that comes with the receiver. |
![]() ![]() ![]() ![]() ![]() |